background image

114A3571-en

©2006, Chamberlain GmbH   All rights reserved

GARAGE DOOR OPENER WARRANTY

Chamberlain GmbH warrants to the first retail purchaser of this product that
the product shall be free from any defect in materials and/or workmanship for
a period of 24 full months (2 years) from the date of purchase. The motor is
warrantied to be free from defects in materials and/or workmanship for a peri-
od of: ML1000A, 60 full months (5 years); ML800A, 48 full months (4 years);
LM600A 36 full months (3years) from the date of purchase. Upon receipt of
the product, the first retail purchaser is under obligation to check the product
for any visible defects. 

Conditions:

The warranty is strictly limited to the reparation or replacement of

the parts of this product which are found to be defective and does not cover
the costs or risks of transportation of the defective parts or product.

This warranty does not cover non-defect damage caused by unreasonable use
(including use not in complete accordance with Chamberlain’s instructions for
installation, operation and care; failure to provide necessary maintenance and
adjustment; or any adaptations of or alterations to the products), labor charges
for dismantling or reinstalling of a repaired or replaced unit or replacement bat-
teries.

A product under warranty which is determined to be defective in materials
and/or workmanship will be repaired or replaced (at Chamberlain's option) at
no cost to the owner for the repair and/or replacement parts and/or product.
Defective parts will be repaired or replaced with new or factory rebuilt parts at
Chamberlain's option.

If, during the warranty period, the product appears as though it may be defec-
tive, contact your original place of purchase.

This warranty does not affect the purchaser’s statutory rights under applicable
national legislation in force nor the purchaser’s rights against the retailer aris-
ing from their sales/purchase contract. In the absence of applicable national or
EU legislation, this warranty will be the purchaser’s sole and exclusive remedy,
and neither Chamberlain nor its affiliates or distributors shall be liable for any
incidental or consequential damages for any express or implied warranty relat-
ing to this product.

No representative or person is authorized to assume for Chamberlain any
other liability in connection with the sale of this product.

D e c l a r a t i o n   o f   C o n f o r m i t y

The undersigned, hereby declare that the equipment specified, and all
accessories, conforms to the Directives and Standards stated. 

Model:...............................................................LM600A, LM800A, LM1000A

2004/108/EC

2006/95/EC

1999/5/EC

EN55014-1 (2000), EN55014-2 (1997), EN61000-3-2 (2000), EN61000-3-3
(1995), EN 301 489-3 (V1.3.1), EN 300 220-3 (V1.1.1), EN60335-1 (1994),
and EN60335-2-95 (2004)

D e c l a r a t i o n   o f   I n c o r p o r a t i o n

A power door operator, in combination with a Garage Door must be installed
and maintained according to all the Manufacturer’s instructions, to meet the
provisions of EN12453, EN13241-1 and Machinery Directive, 89/392/EEC. 

B. P. Kelkhoff
Manager, Regulatory Affairs
Chamberlain GmbH
D-66793 Saarwellingen
March, 2008

8-en

Summary of Contents for LM1000A












Reviews: