Machine specifications MT900E
Rear axle: 9C, permanently lubricated U-joint, and
greasable support bearing
Articulation: 9C, permanently lubricated U-joint, and
greasable slip joint
Engine block heater
Warms engine coolant to make cold weather starts
easier, 120 volt or 240 volt
Drawbar capacity
The vertical weight capacity of the drawbar is dependent on the category.
Distance from PTO shaft to the
hold for the drawbar pin
Maximum down force
Category IV
500 mm (19.7 in)
4536 kg (10 000 lb)
Category V
500 mm (19.7 in)
5670 kg (12 500 lb)
NOTE:
Drawbar can be permitted to swing or can be in a fixed position.
Tire size
Rolling circumference mm (in)
480/80 R46
5832 mm (230 in)
520/85 R42
710/70 R38
480/80 R50
6172 mm (243 in)
520/85 R46
620/70 R46
650/85 R38
710/70 R42
800/70 R38
1.8.2 Shipping weights MT900E
Weight chart
Configuration
Shipping
Estimated operating axle weight
percentages
kg (mass)
lb
front
rear
Standard
18 400
40 530
61
39
With front counter
weight bracket
18 900
41 650
63
37
With front counter
weight GP 20
weights
19 800
43 670
68
32
1. General
MT900 Series Articulated Tractor
1-31
79036231B
Find manuals at http://best-manuals.com/search?&s=CHAL-79036231
