1.5 Lubricant viscosities and refill capacities
1.5.1 Lubricant viscosities for ambient temperatures
Proper oil viscosity grade is determined by the minimum outside temperature while the machine is started
and while operated.
To determine the proper oil viscosity grade, refer to the minimum column in the following table.
This information reflects the coldest ambient temperature condition for starting and for operating a cold
machine.
Refer to the maximum column in the table to select the oil viscosity grade for operating the machine at the
highest temperature anticipated.
Use the highest oil viscosity allowed for ambient temperature when starting the machine.
Machines operated continuously, should use oils having higher oil viscosity in final drives and in
differentials.
Oils with higher oil viscosity will maintain the highest possible oil film thickness.
Consult a dealer if additional information is needed.
1.5.2 Lubricant viscosities
AGCO® Genuine Lubricants are the recommended products for this machine. Using other lubricants
may not provide the same level of required performance.
Lubricant Viscosities for Ambient Temperatures
Compartment
or System
Oil Type and
Classification
Oil Viscosities
Celsius
Fahrenheit
Engine
Crankcase
AGCO® Multiguard®
API grade CK-4
ACEA grade E9
SAE 15W-40
-20
40
-4
104
Front Idler Hub
Midwheel Hub
Drive Wheel Hub
AGCO® Synthetic
Final Drive and Axle
Oil TO-4
Full synthetic SAE
50
-30
50
-22
122
Hydraulic
System
Transmission
Final Drive
AGCO® Permatran®
821XL
SAE 10W-30
-25
30
-13
86
1.5.3 Refill capacities
AGCO Genuine lubricants are the recommended products for this machine. The use of other
lubricants may not provide the same level of necessary performance.
IMPORTANT:
Capacities given are approximate. Check the fluid levels after filling.
[V]
GUID-E8D816FA-6438-4587-B33A-299C7258D0EB [V1]
GUID-51A80A52-4893-42CC-A3BD-F933CCE23BEF [V3]
GUID-B14DE001-72F7-4F77-8207-6C91E9BC9A6B [V4]
1. General
Rubber Track Tractor
1-21
79036614D
