⑵
、
Clean the grill rack and its accessories.
⑶
、
The barbecue grill assembly:
1
、
Place the heating element into the grill pan. Guarantee the metal piece of the grill pan insert the
hole under the control box, and assemble right.
2
、
Fix the grill rack on top.
3
、
Fix up the back baffle according to the diagram show in the instructions.
⑷ 、
Fill the grill pan with water up to the ‘Max.’ marking.
⑸ 、
Let the grill heat up for a moment without any food on the rack. This will reduce the smell when
first switching on a new grill (a slight smell and a little smoke may be emitted-ensure sufficient
ventilation).
Grill
（
1
）
The grill pan must be filled with water up to the ‘Max.’ marking.
（
2
）
Fix the heating element; then ensure that the grill rack is placed correctly on the element.
（
3
）
Insert the plug into the mains supply socket.
（
4
）
Set the thermostat control knob to its ‘Max.’ position. The indicator light turns on, and the heating
element is permanently switched on.
（
5
）
After approximately 5-10 minutes, the heating element reaches the right temperature for grilling.
When you grilling the food stuffs, you can turn the thermostat control knob back to a lower
position and/or adjust the grill rack to the middle or upper position.
（
6
）
The grill can also be used to keep the food warm: by turning the thermostat control knob back to
a lower position, the intervals between the heating element switching on and off can be reduced
to a minimum.
（
7
）
The water in the grill pan will evaporate during use. So you must to fill up water from time to time.
Be careful not to pour water on the heating element.
（
8
）
When grilling is finished, turn the thermostat to “0”(off position) and disconnect the grill from the
mains supply socket.
General care and cleaning
Ensure that the grill is thoroughly cleaned after use.
Before cleaning your barbecue grill, always make sure that the plug has been disconnected from the mains
supply socket. Allow the grill to cool down thoroughly before cleaning.
Never switch the heating element on when it is not placed onto the appliance.
Then you should remove the heating element and control box from the gill pan .the heating element
switch off automatically .Never put the heating element and the plug into water.
Clean the heating element with a clean and dry cloth only.
Clean the grill rack and the grill pan with warm soapy water and dry afterwards.
Don’t use harsh abrasive cleanser or a metal sponge to clean the grill rack and the grill pan
.
Storage
After cleaning, the grill should be stored indoors in a dry location.
