41
installation
Boiler installation
- Fix the boiler support bracket to the wall
and align it.
- Hook the boiler to the bracket.
- Remove the front casing.
- In the event of installation with the hydraulic
bar kit (optional): loosen the two screws B
and remove the blocking bracket 37.
Connect the hydraulic bar valves and
connection pipes to the boiler.
- In the event of installation using a fi rst-
time installation hydraulic Kit, make the
appropriate connections.
- Check the tightness of the water and gas
connection pipes and eliminate any leaks.
F
Excessive pressure device
Fit the drain pipe for safety valve “
F
”.
The
excessive pressure device outlet (see Figure)
must be connected to a drainage siphon which
can be checked visually in order to prevent
maintenance procedures causing harm to
people, animals or property (the manufacturer
shall not be held responsible for any such
damage).
B
B
3
7