CG Emotron VS Series, Quick Start Manual

Page: 143 / 180

Emotron VS Series Quick Start Guide
- 142 -
Group U0 Status Monitoring
Group U0 is used to monitor the AC drive's running state. You can view the parameter values by
using keypad, convenient for on-site commissioning, or from the host computer by means of
communication (address: 0x3000
～ 0x3020). Status monitoring parameters in the running and stop
state are defined by L0.03 and L0.103.
U0.00 Running frequency Range:0.00
～
Fup
Default:0.00Hz
U0.01 Set frequency Range:0.00
～
Fmax
Default:0.00Hz
U0.02 Output voltage
Range:0 ～ 660V
Default:0V
U0.03 Output current Range:0.0
～
3000.0A
Default:0.0A
U0.04 Output power Range:-3000.0
～
3000.0kW
Default:0.0kW
U0.05 Estimated Motor Speed Range:0 ～ 60000rpm
Default:0rpm
U0.06 Bus voltage Range:0
～
1200V
Default:0V
U0.07
Synchronous
Frequency
Range:0.00 ～ Fup
Default:0.00Hz
U0.08 PLC step Range:1
～
15
Default:1
U0.09
Program Operation
Time
Range:0.0 ～ 6000.0s(h)
Default:0.0s(h)
U0.10
PID set
Range:0 ～ 60000
Default:0
U0.11 PID feedback Range:0
～
60000 Default:0
They display the PID setting value and PID feedback value.
PID setting = PID setting (percentage) * F0.03
PID feedback = PID feedback (percentage) * F0.03
U0.12
Status of DI1
～
DI5
digital input terminal
Range:00000 ～ 11111
Default:00000
0 means terminal input status is OFF, while 1 means terminal input status is ON.
Unit's place: DI1
Ten
’ s place: DI2
Hundred ’ s place: DI3
Thousand ’ s place: DI4
Ten Thousand ’ s place: DI5 (VSX Only)
U0.13
Status of DI6 ～ AI3
digital input terminal
Range: 00000
～
11111 Default: 00000
0 means terminal input status is OFF, while 1 means terminal input status is ON.
Unit's place: DI6 (VSX Only)
Ten ’ s place: DI7 (VSX Only)
Hundred ’ s place: AI1
Thousand ’ s place: AI2
Ten Thousand’s place: AI3 (VSX Only)
U0.14
Status of digital output
terminal
Range: 0000 ～ 1111 Default: 0000
0 means terminal input status is OFF, while 1 means terminal input status is ON.
Unit's place: Y1
Ten
’ s place:Y2 (VSX Only)
Hundred ’ s place: R1
Thousand ’ s place: R2 (VSX Only)
U0.15 AI1 input Range: 0.0
～
100.0% Default: 0.0%
U0.16 AI2 input Range: 0.0 ～ 100.0% Default: 0.0%
U0.17
AI3 input
(VSX Only)
Range: 0.0
～
100.0%
Default: 0.0%
U0.18
Keypad potentiometer
input
Range: 0.0
～
100.0% Default: 0.0%
U0.19 HI input Range: 0.00
～
100.00kHz Default: 0.00kHz
U0.20 AO1 output
Range: 0.0 ～ 100.0%
Default: 0.0%
U0.21 AO2 output Range: 0.0
～
100.0% Default: 0.0%