CFLYAI DF801B, User Manual, Page: 22 / 30

20
DF801B USER MANUAL
IX. Control via the APP
1. Power on the Aircraft
(1) Insert the battery into the aircraft.
(2) Put the aircraft on a flat level surface and long press the power switch for at least 2 seconds to power on the aircraft.
Power on the aircraft and put the aircraft on flat level surface for at least 30 seconds for self-checking. When the aircraft ’ s
indicator light turns flashing blue, the aircraft has completed self-checking.
2. Connect with the APP
(1) Open the APP,enter the WLAN settings, click “Drone-XXXXXX” to
connect.
(2) Open the APP, click to learn how to operate the aircraft. Click “Start
Flying” to enter flight interface as shown in below right picture.
Notes: The aircraft can only connect to 5G Wi-Fi enabled mobile phone.
3. Fly the Aircraft
1) Select control mode
The default setting on the APP is Mode 2. Enter the "General
Settings" on the APP to switch the control mode.
2) Position hold mode by default
The aircraft ’ s indicator light turns solid green or blue,
indicating good GPS signal and the aircraft already located.
The aircraft
’ s indicator light turns flashing green or blue,
indicating the aircraft not located yet.
The flight mode on the APP is position hold mode by default.
When the aircraft
’ s indicator light turns solid green, indicating
good GPS signal and the aircraft located, you can unlock the
aircraft and control it to take off.