55
CONTROLS AND FEATURES
Secondary Controls
Ignition Key Switch and Engine Stop Switch -
6
The ignition key switch and engine stop switch are located on the
bottom left of the dashboard.
The ignition switch has 3 positions. Use the key to control the
ignition switch and start the engine. When the key is in the position
of “OFF”, it can be removed from the ignition switch.
Ignition Key
Switch
OFF
Position
Engine is shut down. All electrical except the
winch motor and DC outlets are disabled.
ON
Position
The electrical system of the vehicle is
activated.
START
Position
Turn ignition key to “ ” to start the engine.
Ignition key returns to “On” when released.
Engine Stop
Switch
Engine is stopped.
Engine is ready for work.
WARNING
Do not leave the ignition key inserted when the operator is away.
An unauthorized use of the vehicle by others may result in serious
injury or death. Always remember to remove the ignition key when
the vehicle is not in use.
NOTE:
Do not keep the ignition key switch in ‘START’ for more than
10 seconds.
Summary of Contents for CF1000UTR-2
Page 1: ...OWNER S MANUAL ZFORCE ZF SERIES CF500UTR CF800UTR CF1000UTR 2...
Page 53: ...49 OPERATOR SAFETY 1 2 3 4050 190206 US1303...
Page 54: ...50 OPERATOR SAFETY 4 6...
Page 66: ...62 CONTROLS AND FEATURES Vehicle Features Feature Locations 1 12 11 10 9 7 8 6 1 2 3 4 5 13...