85
SAFETY OPERATION
Additional Cautions for High Speed Operation
Brakes: Braking is very important, especially during high speed operation� It cannot be over-forced� Check
and replace pads more often to get better performance�
Handling: Looseness in the handling parts may cause loss of control� Check to see whether the handlebar
turns freely but has no shaking, and that the wheels turn without shaking or looseness�
Tires: High speed operation requires that tires be in good condition� Good condition tires are crucial for
riding safety. Inspect their overall condition, inflate them to the proper pressure, and check the wheel
balance�
Fuel: Have sufficient fuel onboard for high speed operation.
Engine oil: To avoid engine failure which could result in a loss of control, make sure the oil level is
maintained between the upper and lower level lines�
Coolant: To avoid overheating, check and make sure that the coolant level is between the level lines�
Electrical Equipment: Make sure that the headlights, tail/brake light, turn signals, horn and etc� work
properly�
Fasteners: Make sure that all nuts and bolts are tight and that all safety-related parts are in good condition�
DANGER
Follow all traffic regulations� Do not ride on the highway over posted speed limits� Riding at too high
speed on the highway will violate related regulations� Motorcycles may be forbidden to operate on the
highway in some areas�