Chapter XI Protocol Analyzer (Option)
84
Fig. 11.25 Numeric Keypad
Set the data value through keys on the soft keyboard or Multipurpose a and Multipurpose b.
Click [Address/Data] menu key and set the I2C trigger type to Address/Data, and the menu at the bottom of the
screen will be switched to the Address/Data Trigger Type setup menu:
Fig. 11.26 Address/Data Trigger Setup Menu
For specific operations, refer to address trigger type and data trigger type respectively.
Fig. 11.27 I2C Trigger and Analysis Example
11.2
RS232/RS422/RS485/UART trigger and analysis
The RS232 protocol analyzer option can analyze the RS232, RS422, RS485 and UART buses. When the user
selects RS232 bus, the input polarity will be set to Normal. When the user selects RS422 bus, RS485 bus or
UART bus, the input polarity will be set to Inverted. The RS232 bus is made as an example to introduce the bus
option hereinafter.
The RS232 bus is composed of sending data line (Tx) and receiving data line (Rx). Each frame of data is
composed of Start Bit, Data Bit, Check Bit and Stop Bit, which will be triggered on Tx start bit, Rx start bit, Tx
end of packet, Rx end of packet, Tx data, Rx data, Tx parity error, and Rx parity error.
Summary of Contents for 4456 Series
