29
CLOSED VESSEL MOUNTING INSTRUCTIONS
Closed membrane vessel
Position the vessel such as you have 2 feet in front
of you and 1 foot behind. The control box should
be in front of you as well.
Insert setting feet through the 2 front legs. Do not forget
nuts and bolts (M12)
Do not tighten too much for now as you will need to
adjust the feet at the end, to keep vessel vertical and to
respect a rising slope on the collector (see step 21)
Now Install and fix the rear sensor foot. To help
you, you can tilt the vase slightly forward. Use M12
washers and nuts to fix the sensing leg.
It is better to orient feet as shown above, legs’
holes forming a parallel line to the pump frame.
The 3 feet should be on a same horizontal
plane.
Detail of setting feet and sensor foot fixations
4 wires weight sensor : install with
arrow pointing upwards.
The bottom part of the vessel is already equipped
with a tee and a pipe. If this is a 2
nd
vessel, it is
used to make the connection with 1
st
vessel.
5
1
2
3
4
Front
Install the collector with union fixed on the pipe.
6
