Cetetherm Mini Plus CM737
Installation, service and operating instruction
19
9
Activation of installer parameters
Installer Mode is used to alter the system settings for specific applications, to use the special features of the
room thermostat in a different way or to alter the factory present parameters. Parameters are divided into
groups:
•
Category 1 parameters: Control panel settings
•
Category 2 parameters: ECO-functions
•
Category 3 parameters: Setting and displaying sensor values
•
Category 4 parameters: Heating actuator settings
•
9.1
Entering the installer set-up mode
1. Press the
OFF
button.
2. Press and hold the
button and the two
PROGRAM
and
buttons together.
3. The unit will display the first parameter of
installer parameter group category 1.
4. Press the
or
button to change the
factory setting.
The display will flash indicating that a
change has been made.
5. Press the green
button to confirm the
change. The display will stop flashing.
6. Press the
button to go to the next
parameter.
7. Press the
PROGRAM
button to go to
the next parameter category.
8. To exit installer mode, press the
AUTO
,
MAN
or
OFF
button.
Picture 9
Picture 10
