Cetetherm AquaEfficiency
Installation, service and operating instruction
71
19.4 Settings with double pumps
1.
Navigate from “Home” to “Assist”.
2.
Select the line “Multi-pump setup”.
3. Press [OK].
4. Go to
submenu “Select multi-pump function”.
5.
Select the line “No multi-pump function”.
6. Press [OK] to save the setting.
7. Press to see settings summary.
8. Press [OK] to confirm and enable.
19.5 Setup analog inputs
1.
Navigate from “Home” to “Assist”.
2. Select the lin
e “Setup, analog input”.
3.
Go to the submenu “Function of analog input”.
4.
Select the line “External setpoint influence”.
5. Press [OK].
