Cetetherm AquaEfficiency
Installation, service and operating instruction
70
19.3 Setting the pump control mode
Note:
Cetetherm recommend to use, Constant Curve and with
setpoint 100%.
1.
Navigate from “Home” to “Assist”.
2. Select t
he line “Assisted pump setup”.
3.
Go to the submenu “Select control mode”.
4.
Select the line “Constant curve”.
5. Press [OK] to save.
6.
Go to the submenu “Adjust setpoint”, press [OK] to start
the setting.
7. Select digit with
and adjust with
.
8. Press [OK] to save.
9. Press to see setting summary.
10. Press [OK] to confirm and enable.
11. The selected parameters will be shown in the Home
menu.