CET PMC-53A-E, User Manual

Page: 103 / 112

CET Electric Technology
95
DNP Point Map
Object 1 - Binary Input Status with Flags (Included in Class 0 responses)
Read with Object 1, Variation 2, and Qualifier 6.
Point Description Format Range
0 DI1 1 UINT8 Bit Flags
1 DI2 1 UINT8 Bit Flags
2 DI3
1
UINT8 Bit Flags
3 DI4
1
UINT8 Bit Flags
Supported Flags:
Bit 0 (ONLINE):
0=Offline, 1=Online
Bit 7 (STATE): 0=Off, 1=On
Notes:
1) If the Device Model does not support DI, the Bit 0 and Bit 7 for the bytes of all DI status above would be set to “0”.
Object 10 - Binary Output States (Included in Class 0 responses)
Read with Object 10, Variation 2, and Qualifier 6.
Point Description Format Range
0 Reserved UINT8
1 Clear All Energy Registers UINT8 Always 0
2 Reserved UINT8
3 Clear Peak Demand of This Month (Since Last Reset) UINT8 Always 0
4 Clear All Demand Registers UINT8 Always 0
5 Clear Max/Min Logs of This Month (Since Last Reset) UINT8 Always 0
6 Clear All Max./Min. Log UINT8 Always 0
7 Clear Device Operating Time UINT8 Always 0
8 Clear All Data UINT8 Always 0
9 Clear DI1 Pulse Counter UINT8 Always 0
10 Clear DI2 Pulse Counter UINT8 Always 0
11 Clear DI3 Pulse Counter UINT8 Always 0
12 Clear DI4 Pulse Counter UINT8 Always 0
13 Reserved UINT8
14 Reserved UINT8
15 Clear All Pulse Counters UINT8 Always 0
16 DO1 UINT8 Bit Flags
17 DO2 UINT8 Bit Flags
18 Reserved UINT8
19 Reserved UINT8
20-29 Reserved
30-43 Wiring Diagnostics Status
1
UINT8 Bit Flags
Notes:
1) The following table shows the details of Point 30-43.
No. Event
30 Frequency is out of range (45 to 65Hz) (3P4W or 3P3W)
31 Any phase voltage < 10% of PT Primary (Register 6000) (3P4W only)
32 Any phase current < 10% of CT Primary (Register 6004) (3P4W or 3P3W)
33 Reserved
34 Reserved
…
Voltage Phase Reversal (3P4W only)
Current Phase Reversal (3P4W or 3P3W)
Negative kW Total may be abnormal (3P4W or 3P3W)
Negative kWa is may be abnormal (3P4W only)
Negative kWb may be abnormal (3P4W only)
Negative kWc may be abnormal (3P4W only)
CTa polarity may be reversed (3P4W only)
CTb polarity may be reversed (3P4W only)
43 CTc polarity may be reversed (3P4W only)
44 Disconnection of Residual Current Input
Supported Flags:
Bit 0 (ONLINE):
0 = Offline, which represents that the control of the Output could not be implemented.
1 = Online, which represents that the Output works properly, once control request has been sent, the command could be
correctly implemented.
Bit 7 (STATE): 0=Off, 1=On