CET Electric Technology
113
165
Return Value (x100)
Under Voltage OverDeviation Setpoint Return
166
-
Reserved
167
Return Value (x1000)
Under Ir Setpoint Return
168
Return Value (x100)
Under U2 (Negative Sequence Voltage) Setpoint Return
169
Return Value (x100)
Under U0 (Zero Sequence Voltage) Setpoint Return
170
0
Over Logical Module #1 Setpoint Active
171
0
Over Logical Module #2 Setpoint Active
172
0
Over Logical Module #3 Setpoint Active
173
0
Over Logical Module #4 Setpoint Active
174
0
Over Logical Module #5 Setpoint Active
175
0
Over Logical Module #6 Setpoint Active
176
0
Over Logical Module #1 Setpoint Return
177
0
Over Logical Module #2 Setpoint Return
178
0
Over Logical Module #3 Setpoint Return
179
0
Over Logical Module #4 Setpoint Return
180
0
Over Logical Module #5 Setpoint Return
181
0
Over Logical Module #6 Setpoint Return
4=Self-Diagnostic
1
0
Reserved
2
0
Power Supply of CPU Fault
3
0
A/D Fault
4
0
FRAM Fault
5
0
System Parameter Fault
6
0
Secret Parameter Fault
7
0
Setpoint Parameter Fault
8
0
Data Recorder Parameter Fault
9
0
Waveform Recorder Parameter Fault
10
0
Energy Log Parameter Fault
11
0
TOU Parameter Fault
5=Operations
1
0
Power On
2
0
Power Off
3
X=1 to 3
Set Clock
4
X=1 to 3
Setup Changes
5
X=1 to 3
Clear DI Counter
6
X=1 to 3
Clear SOE
7
X=1 to 3
Clear PQ Log
8
X=1 to 3
Clear Energy
9
X=1 to 3
Clear Data Recorder Log
10
X=1 to 3
Clear Waveform Recorder Log
11
X=1 to 3
Clear IER Log
12
X=1 to 3
Clear Max./Min. Log of This Month (Since Last Reset)
13
X=1 to 3
Clear Peak Demand of This Month (Since Last Reset)
14
X=1 to 3
Clear Operation Time
15
X=1 to 3
Clear PQ Counter
16
X=1 to 3
Clear TOU Energy
17
X=1 to 3
Preset Energy value
18
X=1 to 3
Send Testing Email
19
X=1 to 3
Factory Setup Changes
20
X=1 to 3
Setup DI Pulse Counter
21
X=1 to 3
Reset Normal Parameter to Default
22
X=1 to 3
Reset Factory Parameter to Default
23
X=1 to 3
Restore Factory Defaults
24
X=1 to 3
Preset TOU Energy
25
X=1 to 3
Clear All Data
6=Other
1
0
WF1 Recorder Triggered via Communication
2
0
WF2 Recorder Triggered via Communication
3
Setpoint # X (X = 1 to 30)
WF1 Recorder Triggered by Setpoint # X
4
Setpoint # X
(X = 1 to 30)
WF2 Recorder Triggered by Setpoint # X
5
0
WF1 Recorder Triggered by Dip/Swell
6
0
WF2 Recorder Triggered by Dip/Swell
7
0
WF1 Recorder Triggered by Transient
8
0
WF2 Recorder Triggered by Transient
9
Setpoint # X (X = 1 to 30)
Data Recorder Triggered by Setpoint # X
10
Setpoint # X (X = 1 to 30)
High Speed Data Recorder Triggered by Setpoint # X
11
0
Data Recorder Triggered by Dip/Swell
12
0
High Speed Data Recorder Triggered by Dip/Swell
13
0
Data Recorder Triggered by Transient
14
0
High Speed Data Recorder Triggered by Transient
15
Setpoint # X (X = 1 to 30)
Alarm Email Triggered by Setpoint # X
16
0
Alarm Email Triggered by Dip/Swell
17
0
Alarm Email Triggered by Transient
18
1~4
TOU Schedule Switch
Notes:
1.
Clear Energy
means to clear all 3-Phase, Total Energy Measurement, TOU Energy and Interval Energy
Measurements.
2.
Clear All Data
means to clears all logs, including Data Recorder, Waveform Recorder, Energy Log, PQ Log,
SOE Log, Max./Min. Log of This Month (Since Last Reset), Peak Demand of This Month (Since Last Reset), DI
Counters, Energy Registers, Device Operating Time and TOU energy.
3.
The value of the Operation events 3~25 illustrates where the operations take place: 1= Communications, 2=