Introduction
16
OMEGA Mifare wall terminals
Programming with OMEGA software
You can also manage and program your locking systems online
via a radio frequency link and Access Points, or alternatively
via the optional programming cable.
The following components are required for this system (see
also next page):
State-of-the-art standard PC (No. 1,2) with Windows XP™ or
Windows 7™ operating system, 1 GHz processor or higher,
at least 1 GB of RAM, at least 1 GB of free hard disk space
Network interface card with TCP/IP protocol (for the
installation with Access Points)
CD-ROM drive for installing the software from data media
One free USB port for the use of the programming cable
(optional)
Existing Internet connection for using OMEGA-Quicksupport
Monitor with a resolution of 1,024
768 pixel or higher, or a
resolution of 1,024
600 pixel (netbook)
CEStronics Suite software
A valid licence for CEStronics Suite software
OMEGA MIfare RF-NET Access Point (No. 3, maximum of ten
devices per Access Point)
At least one locking device (No. 4, locking cylinder, IES, wall
terminal).
Programming cable (No. 5, optional)
