8.5 How to insert and change batteries
Tools required
Tool
Required for
PH1 Phillips screwdriver
Open the cover
How to insert and change batteries
1. Use the PH1 screw driver to loosen the screws in the
cover of the communication module, and pull off the
cover.
2. If necessary, take out the two empty batteries. Insert
the two new batteries.
Please ensure that the batteries are inserted
according to the labelling in the battery
compartment which indicates the correct polarity.
3. Screw the cover back onto the case.
The batteries are now inserted or have been changed.
8.6 Battery disposal
See
CESeasy communication module
Page 23 of 37
8 Batteries
