1.
2.
3.
Command Line
"<Filename>.exe" /uninstall /quiet /log "<Filename for Logfile.txt>"
The optional parameter are:
Optional Parameter
Description
/help
Help and short overview of the parameters
/install | /repair | /uninstall |
/layout
Installs, repairs, uninstalls or creates a copy of the installation package
/passive |
/quiet
The user interface is displayed, but no user intervention is required.
No user interface is displayed during installation.
/norestart
If this option is specified, commands with --passive or --quiet will not automatically restart the
computer.
/log log.txt
The logs are written to a specific log.txt file. By default, a log file is created under %TEMP%.
Note, that installing Software or Drivers on Windows Systems typically requires local or Enterprise Admin Rights depending on your Company Policies.
5.1.4. Remove the Pairing
The pairing information are stored on both, the Windows system and AirID. To terminate the connection
, the information on both sides
completely
must be removed.
On Windows
Open the Bluetooth settings on Windows (
)
Settings Devices Bluetooth
Select the corresponding AirID using the displayed serial number and click on "
"
Remove Device
Click "
" to confirm the removal of the device.
Yes
On AirID 2
Remove all pairing information
To remove all stored pairing information from AirID, use the control element to select
.
Settings Remove Pairing Remove all
Remove specific pairing information
To remove specific pairing information from AirID, use the control element to select
.
Settings Remove Pairing Remove "device name"
The pairing information can also be removed via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the
list and click Delete.
On AirID 1
Remove all pairing information
To remove all stored pairing information from AirID, use the control element to select
.
Settings Reset keys Reset all
Remove specific pairing information
To remove specific pairing information from AirID, use the control element to select
.
Settings Reset keys Reset "device name"
The pairing information can also be removed via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the
list and click Delete.
5.2. iOS
With iOS, a system-wide support of smart cards and card readers is not possible. In order to use AirID with a specific app, the AirID driver needs to be
integrated into this app.
The connection to the iOS device is
active when the app
is open. As soon as the app goes into the background, the Bluetooth
only
in foreground
connection to the AirID is released again.
5.2.1. AirID system requirements