Initial Setup
Setting the Initial Configuration
49
Figure 24.
Network Settings Page
2.
Enter the information described in the Network Settings page (see Table 5 on page 50).
3.
Click
Update
. A message confirms that the network configuration has been updated.
4.
Record the network settings in Chapter 10.
5.
Click
SYSTEM TOOLS
, click
MESSAGES
, and click
Download Messages
to download
the Messages file that displays your current network settings.
CAUTION: If you change any network settings, write down the settings before you click
Update
and store in a safe place for future reference. You will not be able to access the CP
3100 if you lose the settings.
NOTE: The Network Settings page has a
Reset
button you can click to cancel your changes.
