Cerrowire ReelRover, User'S Manual And Operating Instructions

Page: 32 / 48

32
Figure 43: Engage the Motor
7. Lock out the output shaft (Figure 44):
▪
Pull the black knob to retract the output shaft
▪
Insert the retaining pin into the now visible hole through the shaft
▪
Release the knob
Figure 44: Lock the Output Shaft
8. Orient the ReelRover so the casters enter the Wemco 2500 first (Figure 45, left). The ReelRover
gearbox should just clear the outer edge of the output shaft (Figure 45, right)
Figure 45: Align ReelRover
9. Push the ReelRover fully into the take-up bay. Insert the caster locking pins and place both shift
levers into the PARK position
WARNING : DO NOT ENTER THE TAKE-UP BAY AT ANY TIME.
10. Reconnect the Wemco 2500 power source
11. Raise the reel lift so the male connector on the adapter output shaft is in line with the female hub
of the ReelRover (Figure 46)