Cerrowire ReelRover, User'S Manual And Operating Instructions

Page: 27 / 48

27
Remove Shaft and Insert Take-up Adaptor
Remove the shaft from the take-up machine (Figure 32) according to the
manufacturer’s instructions.
Insert the take-up adaptor into the
ReelRover’s left-side gearbox and take-up machine as shown in
Figures 33 and 34.
Figure 33: Insert Take-up Adaptor
Position ReelRover into Take-up Machine
With the take-up machine shaft removed, use either NEUTRAL or DRIVE settings to position the
ReelRover into the take-up machine (Figure 34).
Figure 34: Use NEUTRAL or DRIVE to Position ReelRover into Take-up Machine