V3.0
128-bit Key:
Enter
Shared Key of 128 bit.
R1 Key holders :
Enter a unified set of R1 Key Holder identification certification.
MAC Address:
Enter the main roaming device MAC address
R1 Identifier:
Enter Shared identifier.
128-bit Key:
Enter Shared Key of 128 bit.
After the above function is setup, please click "
Save
" button and
reboot
system will apply new profile
and working normally.
3.2
Authentication
This function used to operate in
Access Point
mode
,
the function is for Web Authentication. It supports
authentication for local users / RADIUS Server / OAuth2.0 and Guest. The system supports in N VLANs
with web authentication.
Please click on System -> Authentication
When enable web authentication function, please does make the Access
Point can be connected to gateway. Please refer to 3.1 VLAN Setup. If the
gateway IP address is set error then web authentication page will be can't
display.
