46
DHCP Server
Devices connected to the system can obtain an IP address automatically when this service is
enabled.
DHCP :
Check Enable button to activate this function or Disable to deactivate this
service.
Start IP / End IP:
Specify the range of IP addresses to be used by the DHCP server when
assigning IP address to clients. The default range IP address is 192.168.2.10 to
192.168.2.70, the netmask is 255.255.255.0
DNS1 IP :
Enter IP address of the first DNS server; this field is required.
DNS2 IP :
Enter IP address of the second DNS server; this is optional.
WINS IP :
Enter IP address of the Windows Internet Name Service (WINS) server; this is
optional.
Domain :
Enter the domain name for this network.
Lease Time :
The IP addresses given out by the DHCP server will only be valid for the
duration specified by the lease time. Increasing the time ensure client operation without
interruptions, but could introduce potential conflicts. Lowering the lease time will avoid
potential address conflicts, but might cause more interruptions to the client while it will
acquire new IP addresses from the DHCP server. Default is 86400 seconds
Click Save button to save your changes. Click Reboot button to activate your changes
5.4 Wireless General Setup
The administrator can change the data transmission, channel and output power settings for the
system. Please click on
Wireless -> General
Setup and follow the below setting.
