FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 339 of 597
13.8.3
Entering the Activation Key (CLI)
To enter the activation key, enter the following command in root view.
root> platform activation-key set key string <key string>
If the activation key is not legal (e.g., a typing mistake or an invalid serial
number), an Activation Key Loading Failure event is sent to the Event Log.
When a legal activation key is entered, an Activation Key Loaded Successfully
event is sent to the Event Log.
13.8.4
Activating Demo Mode (CLI)
To activate demo mode, enter the following command in root view:
root> platform activation-key set demo admin enable
To display the current status of demo mode, enter the following command in
root view:
root> platform activation-key show demo status
13.8.5
Displaying a List of Activation-Key-Enabled Features (CLI)
To display a list of features that your current activation key supports, and
usage information about these features, enter the following command in root
view:
root> platform activation-key show usage all
To display a list of the radio capacities that your current activation key
supports and their usage information, enter the following command in root
view:
root> platform activation-key show usage radio
13.9
Setting the Time and Date (Optional) (CLI)
Related Topics:
IP-20 uses the Universal Time Coordinated (UTC) standard for time and date
configuration. UTC is a more updated and accurate method of date
coordination than the earlier date standard, Greenwich Mean Time (GMT).
Every IP-20 unit holds the UTC offset and daylight savings time information
for the location of the unit. Each management unit presenting the information
uses its own UTC offset to present the information with the correct time.
Note:
If the unit is powered down, the time and date are saved for
96 hours (four days). If the unit remains powered down for
longer, the time and date may need to be reconfigured.
To set the UTC time, enter the following command in root view:
root> platform management time-services utc set date-and-time
<date-and-time>
