FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 278 of 597
10.5.5
Configuring a RADIUS Server
If you want to use the IP-20 RADIUS feature, you must first install a RADIUS
server and configure it to work with the IP-20 device.
The following subsections describe how to configure a Win2008 RADIUS
server and a Linux FreeRADIUS server to work with an IP-20. For the sake of
simplicity, the subsections describe how to create three users: an Advanced
user with Advanced read/write permissions, a Normal user with regular
read/write permissions, and a Viewer user with no read/write permissions.
10.5.5.1 Configuring a Win 2008 RADIUS Server
The following sub-sections describe how to configure a Win 2008 RADIUS
Server to work with an IP-20 device.
Step 1
– Creating Groups and Users
To create groups and users:
1 Create three user groups, as follows:
i In the Server Manager, navigate to Configuration > Local Users and
Groups.
ii Right click Groups and create the following three user groups:
Radius_Advanced
Radius_Normal
Radius_Viewer
