Ceragon FibeAir IP-20C, User Manual

Page: 254 / 597

FibeAir IP-20C/S/E User Guide
Ceragon Proprietary and Confidential Page 254 of 597
Table 55: LLDP Local System Parameters
Parameter Definition
System Name The system name included in TLVs transmitted by the LLDP agent, as defined in
the Name field of the Unit Parameters page. See Configuring Unit Parameters.
System Description The system description included in TLVs transmitted by the LLDP agent, as
defined in the Description field of the Unit Parameters page. See Configuring
Unit Parameters.
Chassis ID The MAC Address of the local unit.
Chassis ID SubType The type of encoding used to identify the local unit. In this release, this parameter
is always set to MAC Address.
Capabilities Supported A bitmap value used to identify which system capabilities are supported on the
local system, as included in TLVs transmitted by the LLDP agent.
The bitmap is defined by the following parameters:
0
– other
1 – repeater
2 – bridge
3 – wlanAccessPoint
4 – router
5 – telephone
6 – docsisCableDevice
7 – stationOnly
8 – cVLANComponent
9 – sVLANComponent
10 – twoPortMACRelay
Capabilities Enabled A bitmap value used to identify which system capabilities are enabled on the
local system, as included in TLVs transmitted by the LLDP agent.
The bitmap is defined by the following parameters:
0
– other
1 – repeater
2 – bridge
3 – wlanAccessPoint
4 – router
5 – telephone
6 – docsisCableDevice
7 – stationOnly
8 – cVLANComponent
9 – sVLANComponent
10 – twoPortMACRelay