FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 234 of 597
3 In the Profile ID field, select a unique Profile ID between 1 and 8.
4 For each CoS value, enter the Green priority, from 4 (highest) to 1 (lowest)
(1-4). This priority is applied to Green frames with that CoS egressing a
queue to which the profile is assigned.
5 Optionally, you can enter a description of up to 20 characters in the field to
the right of each CoS value.
6 Click Apply, then Close.
Note:
The Yellow priority values are assigned automatically by the
system.
7.7.2.2 Editing a Service Scheduler Priority Profile
To edit a scheduler priority profile:
1 Select Ethernet > QoS > Scheduler > Priority Profiles. The Scheduler
Priority Profile page opens (Figure 172).
2 Select the profile you want to edit and click Edit. The Scheduler Priority
Profile – Edit page opens. This page is similar to the Scheduler Priority
Profile – Add page (Figure 173). You can edit any parameter except the
Profile ID.
3 Modify the profile.
4 Click Apply, then Close.
7.7.2.3 Deleting a Scheduler Priority Profile
To delete a scheduler priority profile, select the profile in the Scheduler
Priority Profiles page (Figure 172) and click Delete. The profile is deleted.
To delete multiple scheduler priority profiles:
1 Select the profiles in the Scheduler Priority Profiles page or select all the
profiles by selecting the check box in the top row.
2 Click Delete. The profiles are deleted.
