FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 229 of 597
To assign a different queue shaper profile to a queue:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select an interface in the Ethernet Logical Port Configuration table and
click Shaper. The Logical Interfaces – Shaper page opens, with the Egress
Queue Shaper Configuration table open by default (Figure 168).
3 Select an interface in the Ethernet Logical Port Configuration table and
click Shaper. The Logical Interfaces – Shaper page opens, with the Egress
Queue Shaper Configuration table open by default (Figure 168).
4 Select the row you want to edit and click Edit. The Egress Queue Shaper
Configuration – Edit page opens. This page is similar to the Egress Queue
Shaper Configuration – Add page (Figure 169).
5 To assign a different egress queue shaper profile, select the profile in the
Profile ID field.
6 To enable or disable egress queue shaping for the selected queue, select
Enable to enable egress queue shaping for the queue, or Disable to
disable egress queue shaping for the queue.
7 Click Apply, then Close.
7.6.5
Assigning a Service Bundle Shaper Profile to a Service Bundle
To assign a service bundle shaper profile to a service bundle:
1 Select Ethernet > Interfaces > Logical Interfaces. The Logical Interfaces
page opens (Figure 140).
2 Select an interface in the Ethernet Logical Port Configuration table and
click Shaper. The Logical Interfaces – Shaper page opens, with the Egress
Queue Shaper Configuration table open by default (Figure 168).
3 Select Egress Service Bundle Shaper. The Egress Service Bundle Shaper
Configuration table appears. All service bundle shaper profiles defined in
the system are listed in the table.
