FibeAir IP-20C/S/E
User Guide
Ceragon Proprietary and Confidential
Page 155 of 597
Parameter
Definition
BBE
Displays the number of background block errors during the measured
interval.
Integrity
Indicates whether the values received at the time and date of the measured
interval are reliable. An x in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at that
time.
5.6.7
Displaying Modem MSE PMs
To display modem MSE (Minimum Square Error) PMs per radio:
1 Select Radio > PM & Statistics > MSE. The MSE PM report page opens.
Figure 110: MSE PM Report Page
2 For the IP-20C, in the Port field, select the port that holds the radio for
which you want to display PMs.
3 In the Interval Type field:
To display reports in 15-minute intervals, select 15 minutes.
To display reports in daily intervals, select 24 hours.
Table 30 describes the Modem MSE PMs.
Note:
To display the same parameters for a specific interval in a
separate page, select the interval in the Modem MSE PM
table and click View.
