User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 721 of 825
Ceragon Proprietary and Confidential
Parameter
Input Type Permitted Values
Description
sp-id
Number
0-32
The Service Point ID of the service point to which
you want to assign the MEP.
mep-dir
Variable
up
down
The MEP direction.
ccm-enabled
Variable
true
false
true
–
CCM messages are enabled on the MEP.
false
–
CCM messages are disabled on the MEP.
ccm-ltm-
priority
Number
0-7
The p-bit included in CCMs sent by this MEP.
mep-active
Variable
true
false
true
–
The MEP is Active.
false
–
The MEP is Inactive.
22.9.3.5
Displaying MEP and Remote MEP Attributes (CLI)
To display the attributes of a specific MEP, enter the following command in root
view:
root> ethernet soam mep configuration general show meg-id <meg-
id <meg-id> mep-id <mep-id>
For example:
To display a list of remote MEPs (RMEPs) and their parameters per MEG and local
MEP, enter the following command in root view:
root> ethernet soam mep rmep list show meg-id <meg-id <meg-id>
mep-id <mep-id>