User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 717 of 825
Ceragon Proprietary and Confidential
Table 240: SOAM MEG CLI Configuration Parameters
Parameter
Input Type
Permitted Values
Description
meg-id
Number
1-4294967295
Enter an ID for the MEG.
meg-name
String
Up to 44
alphanumeric
characters
A name to identify the MEG.
meg-level
Number
0-7
The MEG level must be the same for MEGs on
both sides of the link. Higher levels take
priority over lower levels.
If MEGs are nested, the OAM flow of each
MEG must be clearly identifiable and
separable from the OAM flows of the other
MEGs. In cases where the OAM flows are not
distinguishable by the Ethernet layer
encapsulation itself, the MEG level in the
OAM frame distinguishes between the OAM
flows of nested MEGs.
Eight MEG levels are available to
accommodate different network deployment
scenarios. When customer, provider, and
operator data path flows are not
distinguishable based on means of the
Ethernet layer encapsulations, the eight MEG
levels can be shared among them to
distinguish between OAM frames belonging
to nested MEGs of customers, providers and
operators. The default MEG level assignment
among customer, provider, and operator
roles is:
•
The customer role is assigned MEG levels
6 and 7
•
The provider role is assigned MEG levels 3
through 5
•
The operator role is assigned MEG levels:
0 through 2
The default MEG level assignment can be
changed via a mutual agreement among
customer, provider, and/or operator roles.
The number of MEG levels used depends on
the number of nested MEs for which the
OAM flows are not distinguishable based on
the Ethernet layer encapsulation.
service-id
Number
0-4095
Assign the MEG to an Ethernet service. You
must define the service before you configure
the MEG.
