User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 695 of 825
Ceragon Proprietary and Confidential
Parameter
Input Type
Permitted Values
Description
server-ipv6
Eight groups of
four
hexadecimal
digits separated
by colons.
Any valid IPv6
address.
The IPv6 address of the PC or laptop
you are using as the SFTP server.
server-path
Text String
The directory path from which you are
downloading the certificate. Enter the
path relative to the SFTP user's home
directory, not the absolute path. If the
location is the home directory, it
should be left empty. If the location is
a sub-folder under the home
directory, specify the folder name. If
the shared folder is "C:\", this
parameter can be left empty or
populated with "//".
filename
Text String
The certificate’s file name in the SFTP
server.
username
Text String
The user name for the SFTP session.
password
Text String
The password for the SFTP session. To
configure the SFTP settings without a
password, simply omit this parameter.
21.5.2
Enabling HTTPS (CLI)
By default, HTTP is used by IP-20 as its web interface protocol.
To change the protocol to HTTPS, enter the following command in root view:
root> platform security url-protocol-set url-protocol https
Note:
Make sure you have installed a valid certificate in the IP-20 before
changing the web interface protocol to HTTPS. Failure to do this may
prevent users from accessing the Web EMS.
To change the protocol back to HTTP, enter the following command in root view:
root> platform security url-protocol-set url-protocol http
To display which protocol is currently enabled, enter the following command in
root view:
root> platform security url-protocol-show
