User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 66 of 825
Ceragon Proprietary and Confidential
2.2.1
PC Setup
To obtain contact between the PC and the IP-20 unit, it is necessary to configure
an IP address on the PC within the same subnet as the IP-20 unit. The default IP-
20 IP address is 192.168.1.1. Set the PC address to e.g. 192.168.1.10 and subnet
mask to 255.255.255.0. Note the initial settings before changing.
Note:
The IP-20 IP address, as well as the password, should be changed
before operating the system. See
and
1 Select Control Panel > All Control Panel Items > Network and Sharing Center.
2 Click Change the adapter settings.
3 Select Local Area Connection > Properties > Internet Protocol Version 4
(TCP/IP), and set the following parameters:
◦
IP address: 192.168.1.10
◦
Subnet mask 255.255.255.0
◦
No default gateway
4 Click
OK
to apply the settings.
Figure 13: Internet Protocol Properties Window
