User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 612 of 825
Ceragon Proprietary and Confidential
Table 175: Trust Mode for MPLS CLI Parameters
Parameter
Input Type
Permitted Values
Description
mpls
Variable
Trust
un-trust
Select the interface's trust mode for MPLS
bits:
•
trust
–
The interface performs QoS
and color classification according to a
user-configurable table for MPLS EXP
to CoS and color classification.
•
un-trust
–
The interface does not
consider MPLS bits during
classification.
The following command enables MPLS trust mode for GbE 1:
eth type eth [1/1]>classification set mpls trust
The following command disables MPLS trust mode for GbE 1:
eth type eth [1/1]>classification set mpls un-trust
18.1.6.2
Modifying the MPLS EXP Bit Classification Table (CLI)
The following table shows the default values for the MPLS EXP bit classification
table.
Table 176: MPLS EXP Bit Classification Table Default Values
MPLS EXP bits
CoS (Configurable)
Color (Configurable)
0
0
Yellow
1
1
Green
2
2
Yellow
3
3
Green
4
4
Yellow
5
5
Green
6
6
Green
7
7
Green
To modify the MPLS EXP bit classification table, enter the following command:
root> ethernet qos mpls-exp-bits-mapping-tbl set mpls-exp
<mpls-exp> cos <cos> color <color>
To display the MPLS EXP bit classification table, enter the following command:
root> ethernet qos mpls-mapping-tbl show