User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 562 of 825
Ceragon Proprietary and Confidential
Parameter
Input Type
Permitted Values
Description
•
preserve-sp-cos-
decision
- The CoS of
frames passing
through the service is
not modified by the
service.
cos
Number
0
–
7
This value is assigned to
frames at the service
level if cos-mode is set
to default-cos.
Otherwise, this value is
not used, and frames
retain whatever CoS
value they were assigned
at the service point or
logical interface level.
The following commands configure Service 10 to assign a CoS value of 7 to frames
traversing the service:
service[10]>service cos-mode set cos-mode default-cos
service[10]>service default-cos set cos 7
The following command configures Service 10 to preserve the CoS decision made
at the interface or service point level for frames traveling through the service:
service[10]>service cos-mode set cos-mode preserve-sp-cos-
decision
17.1.3.6
Configuring a Service’s EVC ID and Description
(CLI)
To add or change the EVC ID of a service, go to service view for the service and
enter the following command:
service[SID]>service evcid set <evcid>
To display a service’s EVC ID, go to service view for the service and enter the
following command:
service[SID]>service evcid show
To add or change the EVC description of a service, go to service view for the
service and enter the following command:
service[SID]>service description set <evc description>
To display a service’s EVC description, go to service view for the service and enter
the following command:
service[SID]>service description show
Table 131: Ethernet Service EVC CLI Parameters
Parameter
Input Type
Permitted Values
Description
