User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 453 of 825
Ceragon Proprietary and Confidential
13.9.3
Entering the Activation Key (CLI)
To enter the activation key, enter the following command in root view.
root> platform activation-key set key string <key string>
If the activation key is not legal (e.g., a typing mistake or an invalid serial number),
an Activation Key Loading Failure event is sent to the Event Log. When a legal
activation key is entered, an Activation Key Loaded Successfully event is sent to
the Event Log.
To set the default activation key, enter the following command in root view:
activation-key s
et key string “Default Activation Key”
Note:
Make sure to enter the command using the exact syntax above,
including the spaces and quotation marks, or an error will be returned.
13.9.4
Activating Demo Mode (CLI)
To activate demo mode, enter the following command in root view:
root> platform activation-key set demo admin enable
To display the current status of demo mode, enter the following command in root
view:
root> platform activation-key show demo status
13.9.5
Activation Key Reclaim (CLI)
If it is necessary to deactivate an IP-20 device, whether to return it for repairs or
for any other reason, the device’s activation key can be reclaimed for a credit that
can be applied to activation keys for other devices.
Note:
Activation key reclaim is only available for IP-20 devices running
CeraOS 9.2 or later.
A composite type activation key provides free activation keys when certain
activation keys are purchased. For example, if a customer purchases an activation
key for one GB ethernet port, two FE ethernet port activation keys are also
provided. If the customer reclaims the activation key, the customer only gets
credit for the original activation key, not for the composite items.
Where the customer has purchased upgrade activation keys, credit is given for the
full feature or capacity, not for each individual upgrade. For example, if the
customer purchased two capacity activation keys for 300M and later purchased
one upgrade activation key to 350M, credit is given as if the customer had
purchased one activation key for 350M and one activation key for 300M.
For instructions on how to reclaim an activation key, refer to the
User Guide for
the Ceragon Activation Key Management System
, Rev A.15 or later, Chapter 7,
Reclaiming an Activation Key
. During the activation key reclaim procedure, you
will need to obtain a Validation Number from the IP-20 unit. To display the
Validation Number, enter the following command in root view:
root> platform activation-key show all
