Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 274 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 274 of 825
Ceragon Proprietary and Confidential
Figure 201: Ethernet Service Points Page – Egress Attributes
Table 49: Service Point Egress Attributes
Parameter Definition
Service point ID This ID is unique within the service. For Point-to-Point and Multipoint
services, the range of values is 1-32. For Management services, the
range of values is 1-30.
Service point name A descriptive name for the service point (optional). The Service Point
Name can be up to 20 characters.
Service point type The service point type. Options are:
•
SAP – Service Access Point.
•
SNP – Service Network Point.
•
MNG – Management service point.
•
PIPE – Pipe service point.
C-Vlan CoS preservation Determines whether the original C-VLAN CoS value is preserved or
restored for frames egressing from the service point.
•
If C-VLAN CoS preservation is enabled, the C-VLAN CoS value of
frames egressing the service point is the same as the value when the
frame entered the service.
•
If C-VLAN CoS preservation is disabled, the C-VLAN CoS value of
frames egressing the service point is set at whatever value might
have been re-assigned by the interface, service point, or service, or
whatever value results from marking (see Marking admin, below).
C-Vlan preservation Determines whether the original C-VLAN ID is preserved or restored for
frames egressing from the service point.
•
If C-VLAN preservation is enabled, the C-VLAN ID of frames
egressing the service point is the same as the C-VLAN ID when the
frame entered the service.
•
If C-VLAN preservation is disabled, the C-VLAN ID of frames
egressing the service point is set at whatever value might have been
re-assigned by the interface, service point, or service, or whatever
value results from marking (see Marking admin, below).