User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 250 of 825
Ceragon Proprietary and Confidential
2 For multi-carrier units, you can select the carrier in the Radio table (see
) and click
View
to display a page for that carrier. A separate
Counters page opens.
Figure 183: Counters Page Per Carrier
–
Multi-Carrier
3 To clear the counters, click
Clear Counters
.
5.6.5
Displaying Signal Level PMs and Configuring Signal Level PM Thresholds
To display signal level PMs per radio:
1 Select
Radio > PM & Statistics > Signal Level
. The Signal Level PM report page
opens.
Figure 184: Signal Level PM Report Page
2 For the IP-20C and IP-20C-HP, in the
Interface
field, select the radio for which
you want to display PMs.
3 In the
Interval Type
field:
◦
To display reports in 15-minute intervals, select
15 minutes
.
◦
To display reports in daily intervals, select
24 hours
.
describes the Signal Level PMs.
Note:
To display the same parameters for a specific interval in a separate
page, select the interval in the RF PM table and click
View
.
