Ceragon FibeAir IP-20 All-Outdoor Series, User Manual

Page: 167 / 825

User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 167 of 825
Ceragon Proprietary and Confidential
To manually switchover to the Standby unit:
1 Select
Platform > Management > Unit Redundancy . The Unit Redundancy
(HSB Protection) page opens ( Figure 102 ).
2 Click Manual Switch .
3 Confirm the action in the confirmation window that appears.
3.7.9 Disabling Automatic Switchover to the Standby Unit
At any point, you can perform lockout, which disables automatic switchover to
the standby unit.
To disable automatic switchover to the Standby unit:
1 Select
Platform > Shelf Management > Unit Redundancy . The Unit
Redundancy (HSB Protection) page opens ( Figure 102 ).
2 Select On in the Lockout field.
3 Click Apply .
To re-enable automatic switchover, select Off in the Lockout field and then
click Apply .
3.7.10 Disabling Unit Protection
You can disable unit protection at any time. If you disable unit protection, keep in
mind that while the unit that was formerly the active unit maintains its IP address,
the unit that was formerly the standby unit is assigned the default IP address
(192.168.1.1)
To disable protection:
1 Select
Platform > Shelf Management > Unit Redundancy . The Unit
Redundancy (HSB Protection) page opens ( Figure 102 ).
2 Select Disable in the Protection Admin field.
3 Click Apply .