User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 150 of 825
Ceragon Proprietary and Confidential
Figure 94: LAG Distribution Function (DF) Page
3 In the
Distribution Function
field, select a pre-set distribution scheme, from 1
to 10. It is recommended to experiment with the various schemes, monitoring
the
TX byte count
fields for each interface to determine the efficiency of each
distribution scheme for the link. The default distribution scheme is 1. The
default LAG distribution pattern is 1.
4 To clear the TX byte counts, select
Clear on read
for one or both interfaces.
The byte counts will be cleared when you close the LAG Distribution Function
(DF) page or click
Refresh
.
Note:
This counter will also be cleared for the members of the LAG in the
Port RMON Statistics page.
5 Click
Apply
to apply the selected distribution scheme.
3.5.5
Deleting a LAG Group
In order to delete a LAG group, you must first make sure that no service points are
attached to the LAG group.
To delete a LAG group:
1 Select
Ethernet
>
Interfaces
>
Groups
>
LAG
. The LAG page opens.
2 Select the LAG group you want to delete in the Link Aggregation table.
3 Click
Delete
underneath the Link Aggregation table. The LAG group is deleted.
To delete multiple LAG groups:
1 Select the LAG groups in the Link Aggregation table or select all the LAG
groups by selecting the check box in the top row.
2 Click
Delete
underneath the Link Aggregation table.
