83
Recommended torque settings
All bolted connections of the bike components have to be tightened carefully and checked regularly to ensure the safe and reliable operation of the
CENTURION bike. This is best done with a torque wrench that disengages at the desired torque value or a click-type torque wrench. Tighten carefully
by approaching the prescribed maximum torque value in small steps (0.5 Nm increments) and check in between the proper fit of the component.
Never exceed the maximum torque value indicated by the manufacturer!
Where no maximum torque setting is given start with 2 Nm. Observe the indicated values and observe the values on the components and/or in the
operating instructions of the component manufacturers on this CENTURION CD-ROM.
Component
Bolted connections
Shimano
1
(Nm)
SRAM/Avid
2
(Nm)
Rear derailleur
Mount (on frame/derailleur hanger)
8 - 10
5 - 7
Cable clamp
5 - 7
5 - 7
Pulley wheels
2.5 - 3
Front derailleur
Mount on frame
5 - 7
5 - 7 (clamp)
5 - 7 (direct mounting)
Cable clamp
6 - 7
5
Brake lever/shifter units
Mount on handlebars
6 - 8
6 - 8
Hub
Quick-release lever
5 - 7.5
Counter nut for bearing adjustment with
quick-release hubs
15 - 17
Sprocket cluster lock ring
30 - 50
40
Crank
Crank mount (grease-free square-head)
34 - 44
Crank mount (Shimano Octalink)
35 - 50
Crank mount (Shimano Hollowtech II)
12 - 14
Crank mount (Isis)
31 - 34 (pedal thread)
43 - 48
Crank mount (Giga X Pipe)
48 - 54
Axle fastening bolt Ultra Torque
Chainwheel mount
8 - 12
12 - 14 (steel)
8 - 9 (alu)
Summary of Contents for ROAD BIKE ISO 4210-2
Page 95: ......