Centurion CP71, Installation Manual

Page: 17 / 40

17 17
REMOVE
LOCK NUT
LIMIT SWITCH
STRIKER PLATE
LOOSEN
LOCKNUT
LOOSEN
SWOP TENSIONER PIN
AND SPRING TO
ADJACENT HOLE
DO NOT ADJUST
POSITION OF TOP
NUT
REMOVE SPRING
AND
TENSIONER PIN
REFIT
LOCK NUT
LOCATE LIMIT SWITCH STRIKER
PLATE, LOOSEN LOCK NUT
AND PUSH STRIKER SUCH THAT
SPRING IS ON THE REVERSE
SIDE OF THE PLATE e.g.
REMOVE CRANK ARM
SHAFT AND SWING
CRANK ARM THROUGH
ANGLE SHOWN
LOOSEN CAP SCREW HOLDING CRANK ARM OF COUNTERBALANCE SPRING.
GIVE CRANK ARM A SHARP TAP WITH A RUBBER MALLET TO LOOSEN OFF TAPER SHAFT.
CHANGE MOUNTING POSITION OF COUNTERBALANCE SPRING.
RE - ADJUST THE LIMIT SWITCH STRIKER PLATE