page 167
www.centsys.com
Once the installation has been successfully completed and tested, it is important to
explain the operation and safety requirements of the system to the end-user.
NEVER ASSUME THE USER KNOWS HOW TO SAFELY OPERATE AUTOMATED
ROADWAY SPIKES!
Even if the user has used such a system before, it does not mean he knows how to
SAFELY operate it. Make sure that the user fully understands the following safety
requirements before
fi
nally handing over the site.
The following needs to be understood by the user:
•
How co-installed safety loops and all other safety features work
(Show them how by demonstration)
•
All the features and bene
fi
ts of the spikes
•
All the safety considerations associated with operating automated roadway
spikes.
The user should be able to pass this knowledge on to all other users of the
automated system and must be made aware of this responsibility
•
Do not activate the CLAWS unless you can see it and can determine that its
area of travel is clear of people, pets, or other obstructions
•
NO ONE MAY PASS OVER RAISING SPIKES
. Always keep people and objects
away from the spikes
•
NEVER LET CHILDREN OPERATE OR PLAY WITH THE SPIKE
CONTROLS
, and do not allow children or pets near the spike area
•
Be careful with moving parts and avoid close proximity to areas where
fi
ngers
or hands could be pinched
•
Secure all easily-accessed spike controls in order to prevent its unauthorised use
•
Keep the automated spikes system properly maintained, and ensure that all
working areas are free of objects that could a
ff
ect its operation and safety
•
On a monthly basis, check the obstruction detection system
and safety devices for correct operation
•
All repair and service work to this product must be done
by a suitably quali
fi
ed person
•
This product was designed and built strictly for the use indicated in this
documentation. Any other use, not expressly indicated here, could compromise
the good condition/operation of the product and/or be a source of danger!
Neither Centurion Systems (Pty) Ltd, nor its subsidiaries, accepts any liability caused by
improper use of the product, or for use other than that for which the automated system
was intended.
Ensure that the customer is in possession of the user guide and that you have
completed the installation details in the back of the manual.
INSTALLATION HANDOVER
SECTION 18
18. Installation Handover
Summary of Contents for CLAWS
Page 51: ...page 51 www centsys com Notes...
Page 69: ...page 69 www centsys com Notes...
Page 87: ...page 87 www centsys com Notes...