SKU 66657
For technical questions, please call 1-800-444-3353.
Page 6
mainTenance and
SerVicinG
Procedures not specifically
explained in this manual
must be performed only by a
qualified technician.
To PreVenT
SeriouS injury
From Tool Failure:
do not use damaged
equipment. if abnormal noise
or vibration occurs, have the
problem corrected before
further use.
cleaning, maintenance, and
lubrication
BeFore eacH uSe,
1.
inspect the
general condition of the Gear Puller.
Check for loose screws, misalignment
or binding of moving parts, cracked or
broken parts, and any other condition
which may affect its safe operation.
aFTer uSe,
2.
clean external surfaces
with clean cloth.
Lightly oil the threads and pivoting
3.
joints periodically to keep them oper-
ating smoothly.
Keep Piston (8) in the fully retracted
4.
position while in storage to prevent
rust or damage.
If rust appears on any part of the tool,
5.
remove it with a penetrating oil.
If the tool fails to perform adequately,
6.
the oil level in the system should be
checked and air purged from the
system.
note:
This step should
only
be per-
formed by a qualified technician.
Remove the Pump Handle Socket
a.
(12) and Pump Axle (10).
Using an oil gun, pour oil slowly into
b.
the pump housing to overflowing.
Reassemble, and wipe excess oil
c.
from the tool.
