SKU 2792
for technical questions, please call 1-800-444-3353.
Page 5
mounting Jack into Lifting frame
Being careful not to damage the
1.
release pedal (18)
, secure the
Jack
(16)
to the Jack Mounting Plate with
two
bolts (20)
. See
figure 1
.
Lift the
2.
Lifting frame (11)
on to the
Jack’s ram and place the
pin (37)
,
on the upper end of the Jack’s arm,
into the bracket on the
Lifting frame
(11)
, securing it with the
bolt (36)
.
installing the pedal and handle
Loosen and remove the screw that
1.
holds in the
foot pedal (17)
. Insert
the
foot pedal (17)
into the receiver
of the
Jack (16)
. Use the screw you
loosened from the pedal assembly to
secure the
foot pedal (17)
into the
receiver of the Jack.
Insert the
2.
handle (12)
into the recep-
tacle on the
rear Lift Arm (5)
and
secure it with the
pin (13)
.
Testing the Stop bar (9)
The Stop Bar (9) must be locked in
1.
one of the four positions after lifting a
load. Not engaging the Stop Bar (9)
may result in serious injury or death,
and damage the Lift.
figure 2
Lower tips of the
Stop bar (9)
Welded indents on bottom base (28)
2. Before each use, check that the lower
tips of the Stop Bar (9) fit behind the
welded indents on the both sides of
the Bottom Base (28). See FIGURE
2.
rev 04c, 10c
