15
15
Zephiro Fog 3000 User Manual
Eng
y
When you shut down the machine, it is recommended that you remove any
remaining fluid inside. Especially when the machine will not be used for a long
time. It is recommended that you open the tank, remove the fluid hose and
place it next to the tank in open air.
y
After use, let the fog machine cool down before transporting it by the handle.
Small bits of fog may still be emitted just after the machine is turned off. Let the
machine cool down for at least 20 minutes and only transport it when the hous-
ing of the machine reaches a temperature that is comfortable enough to handle.
Transporting the machine while it is still hot may cause injuries and permanent
damage to the internal electronics and heating elements.
7 - s
PeCIfICaTIon
Heating Element
3000 Watt
Output distance
8-10 meters
Warm-up time
Approximately 4 Minutes
Tank capacity
10 Liters
Fog output
710m³/Min
Fuel Consumption
About 2L/hour (depending on liquid density)
Ready-indicator inside tank
Yes (Dual color LED)
Wireless remote controller
433,92 MHz (Max 10 Meters)
Wired remote controller
Timer, Manual smoke, Continuous fog
DMX Control
1-CH
Mounting bracket
Included
Power requirements
220V AC, 50Hz
Internal fuse
10A 250V fast blow 20mm glass
Dimensions
703 x 300 x 250 mm (27.7 x 11.8 x 9.8 in)
Weight
10,6 Kg – 23.4 lbs.
Packing Size
760 x 285 x 375 mm (29.9 x 11.2 x 14.8 in)
Packing Weight
12 kg – 26.4 lbs.
Note: Our products are subject to a process of continual further development. Therefore modifications to
the technical features remain subject to change without further notice.
