Assembly and operating instructions
CENTAX-N
033N-00035…00075-F.00
M033-00002-EN
Rev. 2
CENTA Antriebe Kirschey GmbH
9 / 47
2.4
Application not in compliance with the intended use
WARNING
Injury and material damage can occur as a result of:
Inadmissibly high torque
Inadmissibly high or low speeds
Exceeding the specified ambient temperature
Inadmissible ambient medium
Inadmissible coupling enclosure
Exceeding the admissible overall misalignment values
Only use the coupling for the specified application.
CENTA bears no liability for damage resulting from application not in compliance
with the intended use of the equipment.
Should there be a change of plant parameters, the coupling design must be
reviewed by CENTA (address see chapter 1).
