Assembly and operating instructions
CENTAX-N
033N-00035…00075-F.00
M033-00002-EN
Rev. 2
CENTA Antriebe Kirschey GmbH
28 / 47
Slowly build up the oil pressure for expanding the hub.
Build up the oil pressure alternately until the lift path (p up) of the hub (3) is
reached (for p up and reference faces, see installation drawing).
Decrease the oil pressure for expanding the hub.
Remove the pump for expanding the hub from the hub (3).
Maintain the oil pressure for pushing on the hub for one hour.
Decrease the oil pressure for pushing on the hub.
Remove the pump for pushing on the hub from the shaft.
Turn the hub (3), drain oil out of the thread G¼ or G¾ (c) and dispose
correctly.
Screw the screw plug (19) into the hub (3).
IMPORTANT
Do not place a load on the hub for 24 hours.
IMPORTANT
Face of shaft must not protrude to face of hub. Otherwise radial replacement of other
coupling parts is not guaranteed.
