Celsius CELCV100, Operating Instructions Manual

Page: 6 / 12

Before using this appliance, the feet (supplied separately in the carton), must be fitted
to the unit. The screw pack to attach the feet to your appliance will be taped to either
one of the feet for your appliance, or taped to the plug.
Screw holes in base of heater
Screws in position once fitted to heater
Remove the packing. Check to ensure that all parts of this heater, cord and plug are not
damaged. Confirm all parts before disposing of carton. Do not leave packaging materials
like bags and staples within reach of children or animals.
Carefully turn the Main Body upside-down on a scratch-free and stable surface. Be careful
to prevent damage to the cosmetic finish or your floor surfacing.
Each foot supplied with this heater (supplied separately in the carton) requires only 2
screws to attach them securely to the heater. Holes are pre-drilled in the base of the
heater.
TIP: Slightly angle the screws into the holes when you insert them. As you tighten them up,
they will straighten and secure the feet.
The foot comes with 4 pre-drilled holes. It does not matter which way round you mount
them.
The pictures below show the location of pre-drilled holes on the heater base.
Assembly